LED garden lighting has become as popular as outdoor led lighting

Since LED garden lighting started to park tanks on low pressure outdoor lighting lawns a few years ago, it has become very popular. Outdoor LED lighting allows you to achieve amazing results after dark, but it is also very easy to install, cheap to buy, very cheap to run and very safe for children, animals and plants.

Most outdoor LED lighting, like traditional garden lighting, usually uses the 12v DC low voltage power supply provided by the power transformer installed indoors. Nevertheless, similarities exist, as the power of LED garden lamps is only 10% higher than that of conventional incandescent lamps or halogen lamps. The reason is very simple; LED light is produced by the excitation electrons that emit photons (light) However, the traditional light bulb burns a filament, which emits a small amount of light with all the heat. These are fundamentally different ways of producing light. Led is deliberately designed to shine, not others; Incandescent lamps are essentially a small heater that glows only as a by-product. Therefore, the outdoor LED light is ideal for garden lighting, as it features cool operation and the use of a small amount of power. It is also worth mentioning that the effective life of most LED garden lights is ten years or more, thus reducing the maintenance requirements.

LED garden lights appear in various forms. The most common colors are white and blue, but there are other colors as well as color-changing LED lights. One of the most striking features of LED garden lights is how crisp and pure they look. The color is often very vibrant, almost the quality of the gem- Sapphire blue, emerald green, ruby red, yellow crystal, Diamond White. Although filters and diffusion screens can be used to reduce the tone, this itself opens up further effects and design ideas.

In addition to the variety of colors and brightness, outdoor LED lights can also be used in any number of different lamps and lanterns. LED floodlights, wall washing effects, emergency lights, embedded patio and deck lights, columns, lanterns, spikes, pagodas integrated in garden decorations, submerged in the pond.

At the beginning The two most common options are outdoor LED spotlights and LED deck lights. The LED is perfect for being a garden spotlight as the LED light is naturally directional. They also often have a good color rendering index to measure how realistic and vibrant the illuminated area looks. The items to be checked when selecting LED garden spotlights are: brightness ( Even having a 1w LED in a dark garden is surprisingly bright); beam angle ( How light spreads or focuses); And “color”, meaning the actual color ( Such as red or blue) And “color temperature “( How to “cool” or “warm” light appear).

LED deck light is one of the most common forms of garden lighting. You can use them as expected, flush them on the deck, or experiment in many other applications. The LED plate lamp is obviously very strong and can withstand considerable impact (literally) And extreme weather; They are also cheap, lightweight and simple to install. Almost any piece of wood, or any solid material, you can drill a hole in it and power it through a cable to install LED deck lighting. For example, for cheap and simple path lighting, simply hammer some short stakes in the appropriate time interval, drill holes to accept decks of any size, shape or color you want to use feed cables along the ground ( I used the old garden hose buried right below the surface)

That’s it. In fact, you can install LED deck lights pointing up, down, and sideways, any way you like.

How to make your own solar powered led string lights

It is not difficult to make a basic string of solar LED lights. This structure does not require electronic knowledge or programming. What is being done is to upgrade some of the older battery powered mini lights to the led and then use some basic components to charge the battery with a small solar panel. With 1 IC and 1 inductor, we can automate the string so that it can be turned off and charged during the day and turned on at night.

Let’s start. I’ll tell you what I used, but you can improvise your own part. 1 battery-powered lamp set with battery box. 1 Solar Panel 2. 0v @ 80mA (I used two. 2 v parallel NiMHs. If you want to use one Then you need 2 v @> 20 mA1 IC (QX5251F) 220 uF at 1 inductor later ( This is not accurate and you can change it to meet your wishes. )10 LED’s ( White, blue, green or pink)( Red and yellow are a bit different, but you can use them if you really want them. ) Tools A soldering iron. You don’t need to make your own rope. You can buy battery powered LED strings on Ebay for around $2 According to the number of LEDs, $4. Then you can crack the battery box and you will see it in a few steps. If you have an old Christmas line mini light, they need battery power. If you are using an AC power supply, the line is not parallel. You can cut off the AC strings and rewire them in parallel, or you can get two long lines on the LEDs and weld them.

In any case, here is a close-up of the preparations. These are the connections we need to make in order to automatically turn the circuit on and off and power the battery charge and the lights. This is the entire layout. You can add 15 LEDs for each LED, each qx251f @ 20 mAh. The maximum current of qx5 251f is 300 mA, so you can play it with different configurations. I purchased my qx5 251f from the supplier for $20 for 100 pcs. He only sells 10 computers, but paypal still costs $9 plus $2. The following is the contact information of the supplier: seity10@seity.com.hk. someone really wants one or two, contact me and we’ll see if we can fix the issue via paypal or something.

Here’s the secret. You can clean up the whole circuit from any Solar lamp made in China. There are about a dozen different components in the US, but I think you can use them as well. We almost finished several welding points. So, let’s put it together. That’s it. I tested this setting with two 1000 mAh ( Real capacity) They ran all night.

If you are using a real 2000 battery, you can obviously use only one. Remember the maximum output of your solar panel. If your solar panel can only emit 20 mAh, you can only charge the battery under 8 hours of sunlight (ies) 160 mA, so that’s what it can put out.

This is only enough to power 8 LEDs for about 1 hour at full power. The circuit uses only a small part, about 5 mA per LED. You can’t use the full capacity of the battery either. About 35% can be used. It won’t take the battery off after 0. 8volts.

Pendant track lighting – easy installation and with reasonable cost

Pendant track lighting is a great choice for decorating your home with an excellent lighting system. 

No matter where it is installed, it will produce elegant and eye-catching effects

Soothing effect inside. 

In addition, it is not only used to create a good atmosphere in the room, but also an ideal choice for mission lighting. 

Most people have now started installing pendant track lighting throughout the home; 

In fact, it can be installed anywhere in the room or in an empty enclosed space in your house. 

It works perfectly in places with high ceilings. 

In a room with a high ceiling, the normal lighting system hardly gives the whole room a full light impact, nor does it become the main focus of the room. 

In this case, pendant track lighting becomes very convenient and can provide the perfect lighting for your family. 

In addition, you can control the brightness of any specific area by adjusting the beam according to your own convenience. 

If we consider the choice of the pendant track lighting system, they can provide a wide range of options according to different sizes, styles, colors to meet individual needs. 

One of the most popular options is the upside down lights, downlights, mini pendants, kitchen and island pendant lights, and pool tables and pool lights. 

They can buy in different price ranges, from under $100 to over $500. 

The diameter of these chandeliers ranges from less than 10 inch to more than 20 inch. 

In addition, the lighting system has different styles including traditional and modern style, American style, Tiffany style, European style, Victorian style, modern organic style and so on. 

Choices are endless. . . 

What you want is endless! 

You can also get various colors such as black, brass, bronze, Brown, chrome, copper, designer, gold, nickel, tin, rust, silver and white in this light. 

Another advantage of this lighting device is that it can be fixed in some geometric designs or single lines. 

For example, you can use a mini chandelier to highlight any artwork, a beautiful collection of flowers, books, or any classic paintings, etc. 

Because there are light bulbs of different colors, you can make the lighting pattern according to your choice and wish; 

In fact, different types of pendant track lighting can also be made, which is a good choice for specific uses. 

It is recommended that you fix it at the height between 24 “to 30” above the floor, and the height of the mini pendant should be around 18 “to 24” on the first floor. 

If you are looking for the right pendant track lighting option in an exciting deal, then the online lighting store is the best option. 

The biggest benefit of buying it from these stores is that you can get it at a great discount, plus you can deliver it at your doorstep free of charge. 

So, find the pendant lighting of your choice from these stores, which can not only meet the purpose of decoration, but also create a relaxed atmosphere.

How to make your own solar powered led string lights

It is not difficult to make a basic string of solar LED lights. This structure does not require electronic knowledge or programming. What is being done is to upgrade some of the older battery powered mini lights to the led and then use some basic components to charge the battery with a small solar panel. With 1 IC and 1 inductor, we can automate the string so that it can be turned off and charged during the day and turned on at night.

Let’s start. I’ll tell you what I used, but you can improvise your own part. 1 battery-powered lamp set with battery box. 1 Solar Panel 2. 0v @ 80mA (I used two. 2 v parallel NiMHs. If you want to use one Then you need 2 v @> 20 mA1 IC (QX5251F) 220 uF at 1 inductor later ( This is not accurate and you can change it to meet your wishes. )10 LED’s ( White, blue, green or pink)( Red and yellow are a bit different, but you can use them if you really want them. ) Tools A soldering iron. You don’t need to make your own rope. You can buy battery powered LED strings on Ebay for around $2 According to the number of LEDs, $4. Then you can crack the battery box and you will see it in a few steps. If you have an old Christmas line mini light, they need battery power. If you are using an AC power supply, the line is not parallel. You can cut off the AC strings and rewire them in parallel, or you can get two long lines on the LEDs and weld them.

In any case, here is a close-up of the preparations. These are the connections we need to make in order to automatically turn the circuit on and off and power the battery charge and the lights. This is the entire layout. You can add 15 LEDs for each LED, each qx251f @ 20 mAh. The maximum current of qx5 251f is 300 mA, so you can play it with different configurations. I purchased my qx5 251f from the supplier for $20 for 100 pcs. He only sells 10 computers, but paypal still costs $9 plus $2. The following is the contact information of the supplier: seity10@seity.com.hk. someone really wants one or two, contact me and we’ll see if we can fix the issue via paypal or something.

Here’s the secret. You can clean up the whole circuit from any Solar lamp made in China. There are about a dozen different components in the US, but I think you can use them as well. We almost finished several welding points. So, let’s put it together. That’s it. I tested this setting with two 1000 mAh ( Real capacity) They ran all night.

If you are using a real 2000 battery, you can obviously use only one. Remember the maximum output of your solar panel. If your solar panel can only emit 20 mAh, you can only charge the battery under 8 hours of sunlight (ies) 160 mA, so that’s what it can put out.

This is only enough to power 8 LEDs for about 1 hour at full power. The circuit uses only a small part, about 5 mA per LED. You can’t use the full capacity of the battery either. About 35% can be used. It won’t take the battery off after 0. 8volts.

LED garden lighting has become as popular as outdoor led lighting

Since LED garden lighting started to park tanks on low pressure outdoor lighting lawns a few years ago, it has become very popular. Outdoor LED lighting allows you to achieve amazing results after dark, but it is also very easy to install, cheap to buy, very cheap to run and very safe for children, animals and plants.

Most outdoor LED lighting, like traditional garden lighting, usually uses the 12v DC low voltage power supply provided by the power transformer installed indoors. Nevertheless, similarities exist, as the power of LED garden lamps is only 10% higher than that of conventional incandescent lamps or halogen lamps. The reason is very simple; LED light is produced by the excitation electrons that emit photons (light) However, the traditional light bulb burns a filament, which emits a small amount of light with all the heat. These are fundamentally different ways of producing light. Led is deliberately designed to shine, not others; Incandescent lamps are essentially a small heater that glows only as a by-product. Therefore, the outdoor LED light is ideal for garden lighting, as it features cool operation and the use of a small amount of power. It is also worth mentioning that the effective life of most LED garden lights is ten years or more, thus reducing the maintenance requirements.

LED garden lights appear in various forms. The most common colors are white and blue, but there are other colors as well as color-changing LED lights. One of the most striking features of LED garden lights is how crisp and pure they look. The color is often very vibrant, almost the quality of the gem- Sapphire blue, emerald green, ruby red, yellow crystal, Diamond White. Although filters and diffusion screens can be used to reduce the tone, this itself opens up further effects and design ideas.

In addition to the variety of colors and brightness, outdoor LED lights can also be used in any number of different lamps and lanterns. LED floodlights, wall washing effects, emergency lights, embedded patio and deck lights, columns, lanterns, spikes, pagodas integrated in garden decorations, submerged in the pond.

At the beginning The two most common options are outdoor LED spotlights and LED deck lights. The LED is perfect for being a garden spotlight as the LED light is naturally directional. They also often have a good color rendering index to measure how realistic and vibrant the illuminated area looks. The items to be checked when selecting LED garden spotlights are: brightness ( Even having a 1w LED in a dark garden is surprisingly bright); beam angle ( How light spreads or focuses); And “color”, meaning the actual color ( Such as red or blue) And “color temperature “( How to “cool” or “warm” light appear).

LED deck light is one of the most common forms of garden lighting. You can use them as expected, flush them on the deck, or experiment in many other applications. The LED plate lamp is obviously very strong and can withstand considerable impact (literally) And extreme weather; They are also cheap, lightweight and simple to install. Almost any piece of wood, or any solid material, you can drill a hole in it and power it through a cable to install LED deck lighting. For example, for cheap and simple path lighting, simply hammer some short stakes in the appropriate time interval, drill holes to accept decks of any size, shape or color you want to use feed cables along the ground ( I used the old garden hose buried right below the surface)

That’s it. In fact, you can install LED deck lights pointing up, down, and sideways, any way you like.

Large chandelier installation—Methods and steps for large chandelier installation

Chandelier is one of our very common and easy-to-use lamps. It is installed and used in many people’s homes. In some places with large housing space, if you want to buy a chandelier, you will choose a large Chandelier to use, then how do we do the installation work at this time?

 

Large chandelier

Large chandelier installation—Introduction to chandelier

Chandelier: Chandelier, a high-end decorative lighting that is mounted on the indoor ceiling. Whether the pendant lamp is hung by wires or iron supports, it should not be hung too short, hindering normal sight or dazzling. Take the chandeliers in the dining room as an example. The ideal height is to form a pool of light on the dining table, but it will not hinder the sight of everyone on the table. At present, the chandeliers have been fitted with springs or height adjusters, which can be adapted to different floors and needs.

Large chandelier installation-installation and precautions

Large chandeliers are installed on structural layers, such as floor slabs, roof chords, and beams. Small chandeliers are often installed on shelves or reinforced joists. Whether a single chandelier or a combination chandelier, they are produced by the lighting factory at one time. The difference is that a single pendant lamp can be installed directly, and the combined pendant lamp should be installed after the combination or when it is installed. For large-area and strip-shaped lighting, the form of hanging light boxes and light stands is often used.

1. Material preparation

Supporting members: wood (water cubes, battens, and water boards of different specifications), aluminum alloys (sheets, profiles), and steels (section steel, flat steel, and steel plates). Decorative components: plastic, plexiglass plate, glass as separator, exterior decorative veneer, heat sink, copper plate. Other accessories: screws, nails, rivets, finished lamps, adhesives, etc. Construction tools: pliers, screwdrivers, hammers, electric jigsaws, electric hammers, hand saws, rulers, paint brushes, etc.

2. Structural layer connection operation method:

The iron parts or wooden bricks (except for the bearing of water bricks) are embedded in the structural layer first, the buried position should be accurate, and there should be sufficient room for adjustment. Install transition joints on iron parts and wooden bricks in order to adjust the error of embedded parts, and nail, weld, screw and pierce with embedded parts. The booms and slings are connected with the transition joint.

Installation Precautions:

① If there are multiple chandeliers during installation, pay attention to their position and length. You can install the chandeliers while installing the ceiling, so that you can adjust the position and height of the lamps based on the ceiling shelving.

② The hanging rod can be taken out of the ceiling surface by direct outlet method and casing method. The method of adding casing is conducive to installation, which can guarantee the integrity of the ceiling panel, and only drill holes at the positions where the pipe is needed. Hanging cup directly out of the ceiling, it is not easy to align the hole on the surface during installation. Sometimes it is possible to install the boom first and then cut off the panel to dig the hole for installation, but it will affect the decoration effect.

③ The boom should have a certain length of thread for height adjustment. Suspend the light box under the sling boom, pay attention to the reliability of the connection.

3. Joist connection

Fix the boom or sling on the joist (the hoist, the sling is directly nailed, screwed to the sub joist, or connected to the vertical grid by the above-mentioned method of perforating the board. On the added cross jog), then connect the light box below, check whether it is secure, and confirm that the installation is complete.

The above are some of the methods and steps of large pendant lamp installation introduced by Xiaobian. I hope everyone can use it as a reference to understand. If you buy a large pendant lamp in the future, you can refer to the above situation for reasonable installation work. I believe It can bring us a very good use effect.

Large chandelier installation—Methods and steps for large chandelier installation

Chandelier is one of our very common and easy-to-use lamps. It is installed and used in many people’s homes. In some places with large housing space, if you want to buy a chandelier, you will choose a large Chandelier to use, then how do we do the installation work at this time?

 

Large chandelier

Large chandelier installation—Introduction to chandelier

Chandelier: Chandelier, a high-end decorative lighting that is mounted on the indoor ceiling. Whether the pendant lamp is hung by wires or iron supports, it should not be hung too short, hindering normal sight or dazzling. Take the chandeliers in the dining room as an example. The ideal height is to form a pool of light on the dining table, but it will not hinder the sight of everyone on the table. At present, the chandeliers have been fitted with springs or height adjusters, which can be adapted to different floors and needs.

Large chandelier installation-installation and precautions

Large chandeliers are installed on structural layers, such as floor slabs, roof chords, and beams. Small chandeliers are often installed on shelves or reinforced joists. Whether a single chandelier or a combination chandelier, they are produced by the lighting factory at one time. The difference is that a single pendant lamp can be installed directly, and the combined pendant lamp should be installed after the combination or when it is installed. For large-area and strip-shaped lighting, the form of hanging light boxes and light stands is often used.

1. Material preparation

Supporting members: wood (water cubes, battens, and water boards of different specifications), aluminum alloys (sheets, profiles), and steels (section steel, flat steel, and steel plates). Decorative components: plastic, plexiglass plate, glass as separator, exterior decorative veneer, heat sink, copper plate. Other accessories: screws, nails, rivets, finished lamps, adhesives, etc. Construction tools: pliers, screwdrivers, hammers, electric jigsaws, electric hammers, hand saws, rulers, paint brushes, etc.

2. Structural layer connection operation method:

The iron parts or wooden bricks (except for the bearing of water bricks) are embedded in the structural layer first, the buried position should be accurate, and there should be sufficient room for adjustment. Install transition joints on iron parts and wooden bricks in order to adjust the error of embedded parts, and nail, weld, screw and pierce with embedded parts. The booms and slings are connected with the transition joint.

Installation Precautions:

① If there are multiple chandeliers during installation, pay attention to their position and length. You can install the chandeliers while installing the ceiling, so that you can adjust the position and height of the lamps based on the ceiling shelving.

② The hanging rod can be taken out of the ceiling surface by direct outlet method and casing method. The method of adding casing is conducive to installation, which can guarantee the integrity of the ceiling panel, and only drill holes at the positions where the pipe is needed. Hanging cup directly out of the ceiling, it is not easy to align the hole on the surface during installation. Sometimes it is possible to install the boom first and then cut off the panel to dig the hole for installation, but it will affect the decoration effect.

③ The boom should have a certain length of thread for height adjustment. Suspend the light box under the sling boom, pay attention to the reliability of the connection.

3. Joist connection

Fix the boom or sling on the joist (the hoist, the sling is directly nailed, screwed to the sub joist, or connected to the vertical grid by the above-mentioned method of perforating the board. On the added cross jog), then connect the light box below, check whether it is secure, and confirm that the installation is complete.

The above are some of the methods and steps of large pendant lamp installation introduced by Xiaobian. I hope everyone can use it as a reference to understand. If you buy a large pendant lamp in the future, you can refer to the above situation for reasonable installation work. I believe It can bring us a very good use effect.

What the best uv lamp aquarium?

You must be aware that certain flow rates are ideal for targeting particular types of microorganisms — this info is crucial to understand when selecting a best uv lamp aquarium. If you simply want to control algae and problem bacteria you will require a minimum wattage of 4 for your UV bulb and a flow rate of 60 gph. UV sterilizers are usually ineffective against parasites at wattages less than 15 and the minimum flow rate to target these microorganisms is 75 gph. If you know which type of germs you want to target on your reef tank you will have the ability to select a UV sterilizer of the right size to present the right wattage and flow rate. Many UV sterilizers provide flexible flow rates, however, and that means you have a variety of options to choose from.

An instance of a fantastic uv lamp aquarium is the Liangyue UV Sterilizer — that device has a 5w bulb and it may be used with the BioCube pump or other tiny aquariums using the included adapter. For larger tanks, the UV Sterilizer with Power Head is a great alternative. This device contains a water pump plus it is totally submersible — it’s also uniquely designed to make water flow through it in a zig-zag pattern that maximizes its vulnerability to the UV bulb. This sterilizer is very powerful and it comes in two versions — a 15-watt version that treats up to 240gph plus a 25-watt version that treats up to 760gph.

So as to cultivate a healthy and thriving reef tank surroundings you need to do your very best to maintain your tank clean and the water quality as large as you can. In addition to doing weekly water changes and replacing your filter media on a regular basis you may also want to consider installing a UV sterilizer to assist control nuisances such as algae, bacteria and parasites. A UV sterilizer can not just help to get rid of harmful germs but it can also reduce the need for frequent water changes which will make your life easier.

Working principle and application of PWM power amplifier

pwm power amplifier meets the basic lighting of the fitness club and combines the design of each functional area of the gym to perform PWM digital dimming, so that the lamps have lighting and guidance.

pwm power amplifier working principle:

Through the transmission of RF signals, it integrates professional power amplifier dimming, color temperature and RGB and RGBW control. to perform PWM digital dimming(pwm led dimmer), so that the lamps have lighting and guidance. Function, and achieve the effect of stepless dimming.

In addition, the LED controller in the wireless led dimmer controller control package is only 1/3 the size of the conventional led dimmer controller. It does not need to affect the indoor hard installation, and can be easily hidden in the lamp without changing the original environment. This makes the project installation more convenient and the display more convenient. wonderful.

pwm power amplifier applications:

Gym from Malaysia (Fire Station) Gym is a gym designed with HIIT (Short-Term High-Intensity Intermittent Training) method as the core design course.

This gym makes good use of the concept of HIIT. They made this set unfamiliar in Malaysia, but added their own characteristics to the real and effective exercise method, so they found a blue ocean market in the local fitness market. Firestation’s company hopes to build itself into a gym that is most worth taking photos and sharing photos. This is in line with modern social marketing trends.

Our common traditional gym lighting mode is fixed, the brightness and color temperature are not adjustable, and the lighting design cannot really achieve human physical and psychological comfort. The Firestation fitness club makes full use of the wireless driver dimmer control kit to take advantage of the ability to change colors at will, with high-quality light sources and adjustable scenes, which can create a harmonious light environment for the space to the greatest extent.

Equipment area: both fortitude and gentleness

The equipment is divided into aerobic and anaerobic zones. Considering safety, the light should be bright and less shadowy, and the space should be filled with a layered sense. The different colors of light are regularly switched, and the use of lights encourages the bodybuilder to devote himself to fitness.

The wireless signal has strong penetrating ability, and the remote control distance is long.

Bicycle Room: Passion on Lights

In the design of the dynamic bicycle space, the wireless led dimmable controller control package is used to adjust the lighting to match the intense music, and the lighting effect is used to drive the passionate atmosphere of the bicycle space.

Different activities, different scenarios, always satisfy you.

Preset light color, switch lighting scene with one click.

The right light can promote exercise. Bright and dark, warm and cold, changeable and varied, with different exercise methods, make the body and the environment into a harmonious whole.

Best pwm power amplifier product information:

1、pwm power amplifier product parameters

Model: IP306-RP

Input:  12-24VDC

Channels:  3

Output:  5A,360W max

Size:  165*39*26mm

2、pwm power amplifier product image

图片.png

IPON led dimmer has always been committed to making lights with soul, and every gym using IPON led dimmer products is a smart choice. IPON hopes to achieve spiritual communication with athletes through lights and become the most comfortable invisible companion when they exercise.

mountain bike led light bar w/ makita

With summer approaching in Australia, the attraction of riding on cool nights is obvious.
Although a decent bicycle light costs at least $200-300.
This guide will show you how to develop mountain bike lights using small LED lights. (
Usually used for four-wheel drive)
And a cordless drill worth less than $100.
For this project, you need: I found a 1.
Five amperes an hour and 18 volts Makita batteries power my six-year model.
Before I noticed the darkening of the light, the five-inch light went on for nearly two hours.
You may have a different brand of drill battery. You want to use it. I believe there are many other three-dimensional printing designs that you can adapt to your needs. Enjoy!
Helping our customers manage document workflow and increase efficiency through best-in-class 30w solar led street light and services. Fostering the growth and development of our employees.